If you know what to do, you can often see its busy figure in the countryside, and it will be rare in the city, but it may be seen in some food processing plants. It can separate the corn grain from the stalk, and the threshing depth can be adjusted, so it is suitable for the rapid freezing and canning industry in some food processing plants.
.
So no friends who have used it or don't know the corn thresher do not know what the working principle is. Let me tell you about it.
Corn threshing machine, when working, corn is fed into the feeding mouth, corn is hit in the rotor and drum at high speed, the grain is separated from the sieve hole, the corn core is discharged from the tail of the machine, the corn silk and the skin are discharged from the tuyere. The feeding port is located on the top of the top of the machine, and the corn stick enters the threshing room through the feeding mouth, and the high speed rotating rotor impinges the corn grain in the threshing room and separates through the sieve hole, and there is a baffle in the lower part of the entrance to prevent the spatter of the shedding corn grains. And the threshing efficiency of corn thresher is determined by the length and diameter of the drum, and the user can choose this series of corn thresher rationally according to their threshing efficiency.

Then after the corn threshing machine without the use of how to maintain?
Corn thresher is not only a good helper of the farmers' friends, but also a good equipment for our country to promote the development of agriculture. It reduces the labor force and is the representative of our country's scientific and technological progress. This shows that many of our equipment are out of our mind, but it can be designed by the smart minds of the national science and technology personnel. Study on production.

So since the corn thresher is so useful, we should maintain it without using it so that it will not be used because of long storage, as it is maintained and bought as soon as it has been bought.
Generally, the corn thresher is not used after the autumn harvest season, then we can clean up the dust and dirt inside and outside the machine, smear a layer of antirust oil on the surface of the corn thresher without painting, and have some paints on the machine without careful use. Get out of the place to fix the paint on the brush.
After unloading the motor of the corn thresher and the conveyer belt and so on, it is properly kept together. After that, the corn thresher machine is placed in a relatively dry place, because we all know that it will cause the symptoms of rust stains on the surface of the machine. These are the maintenance and maintenance measures that we should do after the corn thresher is not used, so people have to remember these points well and can be used in the future.